Avalon 116pro n75 high temp and tmax running smoothly

So, here's the miner status: Miner Log { 'STATUS': [ { 'STATUS': 'S', 'When': 0, 'Code': 11, 'Msg': 'Summary', 'Description': 'cgminer 4.11.1' } ], 'SUMMARY': [ { 'Elapsed': 1638, 'MHS av': 63123679.40, 'MHS 30s': 69842576.40, 'MHS 1m': 68240457.83, 'MHS 5m': 66119915.60, 'MHS 15m': 54390438.18, 'Found Blocks': 0, 'Getworks': 56, 'Accepted': 94, 'Rejected': 0, 'Hardware Errors': 0, 'Utility': 3.44, 'Discarded': 9244232, 'Stale': 1, 'Get Failures': 0, 'Local Work': 23765, 'Remote Failures': 0, 'Network Blocks': 5, 'Total MH': 103617975540.0000, 'Work Utility': 883832.24, 'Difficulty Accepted': 23920640.00000000, 'Difficulty Rejected': 0.00000000, 'Difficulty Stale': 0.00000000, 'Best Share': 4080493580, 'Device Hardware%': 0.0000, 'Device Rejected%': 0.0000, 'Pool Rejected%': 0.0000, 'Pool Stale%': 0.0000, 'Last getwork': 0 } ] } { 'STATUS': [ { 'STATUS': 'S', 'When': 0, 'Code': 70, 'Msg': 'CGMiner stats', 'Description': 'cgminer 4.11.1' } ], 'STATS': [ { 'STATS': 0, 'ID': 'AVA100', 'Elapsed': 1638, 'Calls': 0, 'Wait': 0.000000, 'Max': 0.000000, 'Min': 99999999.000000, 'MM ID0': 'Ver[1166Pro-N-75-22082901_2164eee_f95bc12] DNA[02010000785032e5] MEMFREE[1199168.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[1639] BOOTBY[0x01.00000000] LW[1598578] MH[0 0 0] DHW[93] HW[0] DH[2.580%] Temp[37] TMax[88] TAvg[75] Fan1[3703] Fan2[3697] Fan3[3660] Fan4[3670] FanR[46%] Vo[313] PS[0 1222 1255 212 2663 1256 2861] PLL0[2110 416 964 11870] PLL1[3739 437 1037 10147] PLL2[1718 251 843 12548] GHSspd[65229.66] DHspd[2.580%] GHSmm[67070.16] GHSavg[63187.81] WU[882723.46] Freq[363.88] Led[0] MGHS[21461.33 20452.90 21273.59] MTmax[88 87 87] MTavg[77 75 73] TA[360] Core[A3200] PING[226] POWS[0] HASHS[0 0

Please help temp is high while another machine shows normal temp

What exactly is your purpose why did you post this if the machine is running fine? Anyway, it seems the miner is running at normal mode but the unit is overheating based on the logs above. However, I noticed that the fan speed is running at 46%. If you want to cool down the miner a bit the solution I could suggest is to force the fan speed to run at 70% or more it would help to drop down the temp. To do that you need to download the FMS app from canaan support and then open the tool and go to diagnose and send this command below. The 90 is the speed of the fan you can set it to 70% to test if it can help reduce the temp and increase it gradually if you are not satisfied.