greg_whale

Yes it is. Or increase breaker unit component providing cabling capacity allows for it.

Wow, that's an impressive trade! We technically already hit $60,000, so do you expect it to revisit or have we passed the bottom and are on our way up?

all you need is extra 3800w? Thats not even alot... you could probably get away with changing the fuse in the panel and not telling the landlord and just running it... I know its shady method but you are not hurting…

if we have 8 x 3500w miners From the consumer unit have 8 x 20amp breakers with there own dedicated cable from each? Also, can you explain this if the voltage drop to 202 volts(from 230/240), how will this cause the…

but some miners use 3000w each...

In the UK, a standard double plug socket typically supports 13 Amps (up to 3500 watts), while ring circuits usually handle around 30-32 Amps (max 7500 watts). With that in mind, if you plug in two or three miners, each…

a shame that you didnt live in europe, I would potentially partner with you, I have £250,000 GBP capital ready for similar idea to what you speak of.

You wont need 4 boards ontop of each other... and even still lets say you did, they are 1.25cm thick. so you lose 5cm one wall 5cm the other wall... negligible.... Its a much better idea than overpaying for these…

Instead of all these special materials and boxes etc, the better and most cost effective way is to use plasterboards and build room inside room...and if its not enough dbi reduction? then put another set of boards,…

I've been getting quotes of about $25 each for these chips, but there's a minimum order of 10 on Alibaba. Do you guys think this is a fair price? Any other places you would suggest checking out?

So, my power supply that came with the Avalon 1166 Pro just gave up on me. What are my choices? Is it possible to use a power supply from Antminers if the total wattage matches? And could you guys recommend some…

In the UK, typical homes come with 80-100Amps... Since most miners run at about 3000watts, you’re limited to using around 8 miners at most... What’s the better option for this?

WhyFhy Good post, but problem with HNT is that the aerial must be high and depends on how many other hotspots in area. I have some setup and the return is really low... embarrassingly low. $6 from 4 hotspots total. some…

BM1397AG or BM1397AH I'm looking to fix some chips on my hashboard and I need to figure out which ones to get. Does it even make a difference which one I buy if they both are compatible with the S17+?