luckylynx

Antminer S1's are going to be the best bang for your buck GHs wise. There were a bunch that just sold for $50 each. I would setup 4 S1's with 2x of the DPS-800 GBA 850W (1000W on 240V) power supplies and gigampz…

Very interested in your take on the R4, considering getting some of those for office heating myself.

Update: Kept the two S7's vertical, running a 637M clock and still at or under ~60*C board temp. HW errors are negligible. Anyone else see if there was significant difference from running it vertically?

True, but air speed minimizes the effect of natural convection from my understanding, and with two fans humming at 4200RPM I wasn't sure there would be much of a difference. My experience was there is. Can't wait to put…

Oh, and I had them at opposite positions during testing (#53 vertical while #54 was horizontal, etc) to try to eliminate environmental factors as the cause, the screenshots were also taken at the same time of day, one…

I decided to give Strato's suggestion a shot using the S7 and see if there’s a noticeable change between placing it horizontally or vertically on a wire rack. And guess what, there actually was: For S7 #53 in Horizontal…