oracle_byte

Last week I had an electrician install 2x 60 Amp breakers. Each breaker then serves 3 outlets, total of 6 outlets. I have the 1246's and a KD5 hooked up to them with no issues so far. So i think 20amp per box should…

Thats what I wanted to find out, when it was manufactured, could not find one. Hoping they have a similar site to Bitmain to check like this: https://service.bitmain.com/support/warranty

Is there any way to verify the warranty status for the Avalon 1246 models 83 and 85t, similar to how we check for Antminers on the Bitmain site? I finally received my miners from a reputable supplier who promised they’d…

So far not a fan of the Avalon 1246's. The hash rate, irrespective of pool is much lower compared to what it is supposed to do. On my 85THs, it gets a max of 80, usually running lower. The 83THS gets high 70's and close…

what would the CFM requirement be to push the air through something like a Avalon 1246? I saw some silent inline duct fans that have a cfm of 1200. Wonder if that would be good for 2 or 3 machines? Was thinking put a…

Just wanted to report back on the duct fans. I have few Avalons 1246's all on the same rack. These machines are in the attic, in Texas, and today is a warm day, which I was waiting for to report back On 1 machine I…

Will do, ordered the fans today.

This is awesome info - thank you.. For the bend, I can shorten that exhaust duct, just needed it pointed upwards towards the exhaust fan. I have a ~2500 cfm exhaust on the roof, may add another, enough ventilation, so…

Is there a calculation to see the static pressure, to see the max duct I can have. The plan is: Intake Inside: AC Ininity 10" Air filter box --> ~ 2 ft Insulated 10" duct --> AC Infinity 10" Inline duct fan --> Reducer…

Need to research this more I guess. I was going to add 1x1200 cfm duct fan and split it to 2 machines on the intake side, and another 1200 cfm duct fan on the exhaust side for every 2 machines. ducts were 8" and about…

Thank you. So, I could technically split the a 1300 cfm fan across 2 ducts, i could reduce it to 1200 cfm and split it between 2 machines, giving each machine ~ 600cfm? Same route for the exhaust side - read somewhere…

Hi, is that the total cfm per machine (s19 / Avalon 1246) or for each fan. Trying to calculate how many duct fans I need per machine or can combine across per machine Thank you.